The PCB printer allows to print directly circuit starting form Gerber file. The integrated software helps step-by-step the worker to fabricate the final geometry easily, both on bare substrate and on preprinted pattern, aligning them. The printer has also a heated deposition plate, for silver paste sintering and for solder paste sintering, that allows to mount components even after printing phase. There is also the possibility to couple a drill, to obtain vias on the board. An example of printer ability is reported into the picture.
Printer dimensions (L × W × H) 390mm × 257mm × 207mm -Weight 7kg - Printing area 128mm × 116mm- Max. heating temperature 240°C - Minimum trace width 0.2mm - Minimum pin-to-pin pitch 0.65mm - Resistivity 12mΩ/Sq a 70µm - Maximum substrate thickness 3mm - Maximum drilling speed 13000RPM - Power (at 12V) 25W - Bit maximum diameter 2mm - Bit maximum length 38.1mm